Product name
2502LT-EOS Low tightening pressure type general-purpose thin gasket
Product model
2502LT-EOS
Product type
With outer ring Filler material: Specially treated PILLARFOIL™ + inorganic fiber
Product Introduction
Spiral wound gasket of specially treated flexible graphite filler layered with inorganic filler and wound with stainless steel hoop.
This gasket ensures sufficient sealability at a tightening force equivalent to that for a sheet gasket, without the necessity of flange modification, bolt material changeover, etc. in the parts that have used conventional sheet gaskets.
This gasket can be used in high temperature ranges where conventional sheet gaskets are not applicable. It can be re-tightened after heat load is applied.
Material
Graphite, inorganic fiber, and various metals
Application
×
Product specifications
Operating temperature: -50 to +450°C
Operating pressure: 1.4 MPaG (JIS10K)
Gasket factor (m value): 2
Minimum design seating stress (y value): 25.5N/mm2
Minimum seating stress (y value): 29.4N/mm2
